Dynapac CA2500D Specifications
The Dynapac CA2500D Single Drum Vibratory Roller features a state-of-the-art design and this roller represents yet another example of Atlas Copco’s Dynapac innovative thinking... Show More
Dynapac CA2500D
(Roadway Paving Equipment-Concrete, Asphalt : Compactor Rollers)
The Dynapac CA2500D Single Drum Vibratory Roller features a state-of-the-art design and this roller represents yet another example of Atlas Copco’s Dynapac innovative thinking. There is much more to soil compaction than the roller, Dynapac applied unmatched know-how in the field of soil compaction to the entire compaction mission. This ranges from planning the task, through the rolling phase, to analyzing the results once the job is complete.
Technical Data
| Masses | |
| Operating mass (incl. ROPS) | 10100 kg |
|---|---|
| Operating mass (incl. Cab) | 10300 kg |
| Module mass (front/rear) | |
| Module mass (front, std/rear) | 5, 600/4, 700 kg |
| Max. operating mass | 11900 kg |
| Traction | |
| Speed range | 0 - 12 km/h |
| Tyre size (8 ply) | 23, 1 x 26 AW |
| Theor. gradeability | 51 % |
| Vertical oscillation | ±9° |
| Compaction | |
| Static linear load | 26 kg/cm |
| Nominal amplitude (high/low) | 1.8 mm/ 0.9 mm |
| Vibration frequency (high/low amplitude) | 33 Hz/ 34 Hz |
| Centrifugal force (high/low amplitude) | 250 kN/ 130 kN |
| Engine | |
| Manufacturer/Model | Cummins QSF3.8 (IV/4final) |
| Type | Water cooled turbo Diesel |
| Rated power, SAE J1995 | 89 kW (120 hp) @ 2, 200 rpm |
| Fuel tank capacity | 272 l |
| DEF tank capacity | 20 l |
| Alternative Engine | |
| Manufacturer/Model | Cummins QSB4.5 (IIIA/3) |
| Type | Water cooled turbo Diesel |
| Rated power, SAE J1995 | 97 kW (130 hp ) @ 2200 rpm |
| Hydraulic system | |
| Driving | Hydrostatic |
| Vibration | Hydrostatic |
| Steering | Hydrostatic |
| Service brake | Hydrostatic in forward and reverse lever. |
| Parking/ Emergency brake |
Failsafe multidisc brake in drum gear box and in rear axle. |
Crane Specifications, Load Charts, and Crane Manuals are for *Reference Only* and are not to be used by the crane operator to operate any type of crane, telehandler, lift truck or aerial access device. To obtain OEM Crane Service, Crane Parts or Crane Maintenance Manuals, contact the crane and or lifting manufacturer directly.