![\"Davco](\"http:\/\/www.linkbelt.com\/images\/news\/davco_tandem_w.jpg\")
Davco crews have taken a real liking most recently to the TCC-1100<\/a> primarily for lifting and logistical purposes. According to Faas, the TCC-1100 travels throughout his property, to and from designated lifting spots quickly and easily. Standard square metal tubing or H-beams are cut into various lengths and welded together and maneuvered with smaller cranes like the Link-Belt RTC-8050 Series II. Once welded into larger, structural pieces, the TCC-1100 takes over to load and unload trucks carrying the large weldments to various facilities, including Hardisty Terminal. The TCC-1100 always moves lift ready, because there are no outriggers or cribbing required. If the unit needs to move several feet or acres with its load, it can and does so easily, and it makes for a very efficient tool for Faas and Davco. In some instances structures weigh up to 150,000 lbs. and a 90-ton HTC-8690 is used in combination with the TCC-1100 to lift the structures in tandem on to a trailer for transport.<\/p>\n\u201cSince we needed a crane to lift pieces that never seemed to be on a set schedule, we looked at purchasing our own cranes as a way of controlling costs. We had a choice between Link-Belt and another manufacturer. The Link-Belt people along with the dealer, ES&S, seemed to treat us better. We have had good luck with the cranes and the dealer, so we stayed with Link-Belt,\u201d explained Faas.<\/p>\n
\u201cHaving our own cranes is to our advantage. We are not paying rent on a machine when we aren\u2019t sure as to exactly when we will need it. Now with the advent of the larger oil components we\u2019re building, we are using the rigs every day, and gaining better control of our fabrication flow because we have them readily available whatever day we happen to need them,\u201d added Faas. \u201cThe cranes are nice to operate. Everybody likes the cranes and likes to run them. They have stood up well for us.\u201d<\/p>\n