{"id":13025,"date":"2018-10-16T22:02:10","date_gmt":"2018-10-16T22:02:10","guid":{"rendered":"https:\/\/minutes.machine.market\/?p=13025"},"modified":"2018-10-16T22:02:10","modified_gmt":"2018-10-16T22:02:10","slug":"buckman-beverage-employs-dual-axis-crane-for-loading-beer-kegs","status":"publish","type":"post","link":"https:\/\/machine.market\/blog\/buckman-beverage-employs-dual-axis-crane-for-loading-beer-kegs\/","title":{"rendered":"Buckman Beverage employs dual-axis crane for loading Beer Kegs"},"content":{"rendered":"

When Buckman Beverage began its beer distribution business in Philadelphia, it had to use two very robust workers for every delivery. All kegs were either rolled down ramps or manually lifted out of the back of vehicles and onto hand trucks.<\/p>\n

The company was using Ford Transits with extended wheelbases for their deliveries and could only hire workers who were physically able to manage the demands of loading and unloading a vehicle\u2019s payload of 25 kegs of beer.<\/p>\n

And, the vans\u2019 20-foot vehicle lengths, coupled with their 8-foot ramps (which extended from the rear doors), made it difficult to park and offload in the city. The ramps often couldn\u2019t be used to unload the 160-pound kegs.<\/p>\n

\u201cMy business partners and I were in a constant state of anxiety because manually lifting, sliding and rolling kegs of beer can pose physical challenges and cause property damage,\u201d says Jim Buckman, president of Buckman Beverage. \u201cWe care about our workers, and it seemed there had to be a better way.\u201d<\/p><\/blockquote>\n

So Buckman explored post-mounted hoists as an alternative. Unfortunately, post-mounted and fixed-axis cranes have an operational arc and can only lift and lower an object along the fixed trajectory of the crane\u2019s arm, as it pivots around the single axis of the crane\u2019s vertical post.<\/p>\n

Although the arc\u2019s size can increase or decrease by extending or retracting the crane arm, as a rule, no adjustment can be made under the load. Additionally, the lifting capacity of these cranes is generally diminished proportionately to the crane arm\u2019s extension, sometimes reducing it to less than half the maximum load limit.<\/p>\n

The single-axis cranes could help transport kegs in and out of vehicles, but once a keg is inside a vehicle, operators have no choice but to move it a second time\u2014either manually or with a hand truck.<\/p>\n

\u201cA post-mounted crane was close, but no cigar,\u201d Buckman adds. \u201cSo I kept searching.\u201d<\/p>\n

The search led to a crane that was an intelligent alternative to post-mounted and fixed-axis\u00a0cranes<\/a>. The crane remains inside vehicles and away from the elements. Yet, unlike post-mounted and fixed-axis cranes, it resides at ceiling height and above shelving.<\/p>\n

\"\"<\/p>\n

It can also slide to either side of a vehicle or stow in the center of a cargo hold until it\u2019s needed. Its boom is easily positioned because it can move on two axis\u00a0points, sliding laterally up to 8 feet (depending on the vehicle) and extending up to 45.5 inches in length.<\/p>\n

\u201cThe crane not only offers better lifting characteristics but has superior loading capabilities as well,\u201d Buckman adds. \u201cUnlike swiveling cranes that would do well to simply position a keg at the threshold of a cargo hold, the crane can take the keg well into the cargo space\u2014forward of the vehicle\u2019s rear axle, depositing it in an optimal position with its unique dual-axis precision.\u201d<\/p>\n